HP Procurve Audit

[markhazzy]

HI all,

We need to do an audit to update our documentation, one being port mapping.

Rather than physically trace the cables to the ports then correlate this with network sockets, is it possible to go onto the Switch console and see what devices are using the ports,

IE Port 1 on the switc,h plugs into port 1 on the patch panel but we want to know what device is on the other end rather than routing behing desks trying to find the correct socket number.

Thanks

Mark

[Vince_Whirlwind]

Solarwinds have a good switchport mapper.

IMC gives you partial information under "IP/MAC Learning Query".

[Richard Litchfield]

Have you tried these commands on the ProCurve switch consoles?

show arp

show mac-address

show lldp info remote