HPE Aruba Networking & ProVision-based
1832891 Members
2400 Online
110048 Solutions
New Discussion

J9088A Crashing (R.11.98)

 
SOLVED
Go to solution
fisherman_steve
Occasional Contributor

J9088A Crashing (R.11.98)

I rebooted a 2960 earlier today (having changed max-vlans to 25) and it took ages to reboot.  Physically looking at the lights on it, it appeared to come up and then restart the boot cycle again.

 

It eventually booted, but I have notice the following when I do a SHOW BOOT-HISTORY...

 

#   sh boot-history
Master -- Saved Crash Information (most recent first):
======================================================

SubSystem 0 went down:  01/01/90 00:01:18
NMI event SW:IP=0x8073d020 SR:0x1000fc01 Task='bcmXGS3AsyncTX' Task ID=0x85e66e20
 sp:0x85e66d30
SubSystem 0 went down:  01/01/90 00:01:19
NMI event SW:IP=0x806b779c SR:0x1000fc01 Task='bcmRX' Task ID=0x85e4f720
 sp:0x85e4f598
SubSystem 0 went down:  01/01/90 00:01:18
NMI event SW:IP=0x806baf08 SR:0x1000fc01 Task='bcmRX' Task ID=0x85e4f720
 sp:0x85e4f5b0
SubSystem 0 went down:  01/01/90 00:01:18
NMI event SW:IP=0x806baf50 SR:0x1000fc01 Task='bcmRX' Task ID=0x85e4f720
 sp:0x85e4f5b0

 

Can anyone shed any light on whether this is a hardware / software fault and advise on what action I should take to overcome this?

 

Thanks

2 REPLIES 2
paulgear
Esteemed Contributor
Solution

Re: J9088A Crashing (R.11.98)

Since you're on the latest code, your best bet is to contact HP support.  I would assume hardware in the absence of any other indicators, and request an advance replacement if it happens again.

Regards,
Paul
fisherman_steve
Occasional Contributor

Re: J9088A Crashing (R.11.98)

Thanks Paul, I will get onto HP to get it replaced.


Steve