HPE Community
HPE Aruba Networking & ProVision-based
1827284 Members
3575 Online
109717 Solutions
New Discussion

Re: qos trust dscp

 
SOLVED
Go to solution
JM0945
Occasional Advisor

‎02-08-2021 02:06 AM

‎02-08-2021 02:06 AM

qos trust dscp

Hello,
On HPE comware switches we can use the "qos trust dscp" command line. This command line is implemented on the interfaces trunks.
Can you give me the equivalent command line on an aruba 2930F switch?

Thank you for your reply.

Regards

0 Kudos
2 REPLIES 2
akg7
HPE Pro

‎02-08-2021 05:27 AM

‎02-08-2021 05:27 AM

Re: qos trust dscp

Hello,

I believe this is the command under interface :
qos trust <auto | dot1p | dscp | none>

Thanks!

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
0 Kudos
akg7
HPE Pro

‎02-09-2021 01:02 PM

‎02-09-2021 01:02 PM

Solution

Re: qos trust dscp

Hello,

 

HPE is awaiting your response. Please confirm status of your query.

 

Thanks!

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.