HPE Aruba Networking & ProVision-based
1833873 Members
4419 Online
110063 Solutions
New Discussion

Re: Want to upgrade the software of my 5406zl

 
SOLVED
Go to solution
Nico2010
New Member

Want to upgrade the software of my 5406zl

Hello All,

I want to upgrade the Software of my procurve 5406zl who is on K.11.11 to K15.05.

I must follow this:

 

K.11.11 through K.12.29                   Update and reload into software
(BootROM K.11.00 - K.11.03)            version K.12.31 or K.12.62

K.12.31 through K.13.55                   Update and reload into software
(BootROM K.12.12 - 12.14)                version K.13.58 or K.13.68

K.13.58 or newer                                Update directly into software version
(BootROM K.12.17 or newer;             K.15.05.0002 (BootROM K.15.13)
use "show flash" command)

 

My question is where can I download the updates :

 version K.12.31 or K.12.62

version K.13.58 or K.13.68

Thanks in advance

 

Nico

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to  ProCurve / ProVision-Based. -HP Forum Moderator

5 REPLIES 5
Fredrik Lönnman
Honored Contributor
Solution

Re: Want to upgrade the software of my 5406zl

Here you go: https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=J8697A

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

RyanC
New Member

Re: Want to upgrade the software of my 5406zl

version K.12.31 or K.12.62

version K.13.58 or K.13.68

ARE NOT available on the link that was posted.......

Fredrik Lönnman
Honored Contributor

Re: Want to upgrade the software of my 5406zl

hm? furthest down.

 

K.13.68 (for BootROM updates only)     Previous    06-Dec-2009    25-Jan-2011    Release notes     7.6 MB
K.12.62 (for BootROM updates only)     Previous    24-Nov-2008    11-Feb-2011    Release notes     6.8 MB

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

lannieS
New Member

Re: Want to upgrade the software of my 5406zl

I have already tried that link and it says server not found or connection reset every time I try to use it.

I cannot upgrade my switch until I'm at this version and i cannot download it!

Fredrik Lönnman
Honored Contributor

Re: Want to upgrade the software of my 5406zl

I just tried it again and it works fine, the problem is at your end. Try another connection or something.

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S