CommandView EVA and SNMP community

[Mark Smithers]

I have a server (W2K3) running the latest CommandView (v5) all setup to send traps to my management server.

My issue is that I do not want to send the traps to the "public" community. I have tried to configure the SNMP service of the server and removed the public community and added my own community, rebooted the server and the created a failure on the EVA (pulling out a mirror port cable).

I then saw a number of traps being sent to my management server, but all to the public community and not to my test community.

Anyone managedd to change this or is it in-built to Commandview to only send to the Public Community?

Many thanks for you time

Mark

[Pshedges]

Coonect to the SMA via IE.
Select Settings and then Network.
Then select the SNMP Properties and change as required.