Upgrade Firmware of SAN HP EVA5000

[Syed Mohsin Ali]

Is there any document of procedure to upgrade the firmware of EVA5000 including 2/32 SAN Switches.
If any one can provide me the link of that doc.

Regards,
Ali

[Luk Vandenbussche]

Hi,

You have to contact your HP Support Center for this documents and procedures. You can obtain them based on your contract.

Al depends from which VCS version you are starting and to which VCS version you want to go.
You also have to consider your appliance and all the drivers and firmwares off the servers connected to the san

[Mark Poeschl_2 · Accepted solution]

And the switch firmware upgrade is a completely separate thing. That you can do yourself. The latest version is 5.1.0c which you can download from:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=315679&prodTypeId=12169&prodSeriesId=315102&swLang=8&taskId=135&swEnvOID=54

Once you have the firmware downloaded onto a server on your network, use the 'firmwaredownload' command on the switch to get it installed.

[Syed Mohsin Ali]

Thanx, Appreciate