HPE EVA Storage
1833059 Members
2479 Online
110049 Solutions
New Discussion

HBA firmware upgrade using LPUTIL

 
dentistcorn
Regular Advisor

HBA firmware upgrade using LPUTIL

Is there a Customer Advisory indicating NOT to use LPUTILNT for upgrading the firmware on an LP8000 HBA? Or ONLY to use the boot floppy for the firmware upgrade?
4 REPLIES 4
Uwe Zessin
Honored Contributor

Re: HBA firmware upgrade using LPUTIL

Hm, yes, I thought I have seen it, but I don't have an URL handy and I somehow can not find it with Google or HP's search.
.
dentistcorn
Regular Advisor

Re: HBA firmware upgrade using LPUTIL

Uwe,

Please let me know. I'm very interested in finding this out.

Thanks
Andrew_168
Regular Advisor

Re: HBA firmware upgrade using LPUTIL

You are quite correct, this was the case, I was doing an install with HP, they used LPUTIL to upgrade the controllers and said the problem had been fixed, its all down to versions, the latest version is ok, the problem is I cannot remember where the cut-off point is, and if you use the wrong version, the FC card is rendered inoperative.

Andy
Randy Weis
Frequent Advisor

Re: HBA firmware upgrade using LPUTIL

This is Customer Advisory OI040102_CW01. I have attached it.
I think this should answer your question.
Experience is the name everyone gives to their mistakes. Oscar Wilde.