HTTPS Access required for Brocade Switch

[Sivaramakrishna_1]

Hello,

One Customer have 4/16 SAN SWitch and he wants to disable the telnet and http access for switch. He wants to configure the https access. FOS is 6.0.0b. I tried using "configure" command but no use..

Could anybody help on this..

[Frantisek Kysela]

Hi,
for first you need generate and install ssl certificate for the switch by scrcertutil command. Then you will can activate ssl on switch by configure command. For disabling http and telnet protocopls you can use ipfilter command.

Frantisek

[Frantisek Kysela]

Hi,
if you have access to brocade connect, there is link to FOS documentation
http://www.brocadeconnect.com/brocdoc/viewSummary.jsp?cat_id=66675989

Frantisek

[Sivaramakrishna_1]

Hi Frantisek,

Thanks... I got it from the admin guide of FOS 6.x.

Thanks for help..

Siva

[Sivaramakrishna_1]

Thanks. I got the solution

Siva...