Linux Platform Kit for IA64 for EVA3000

[Roshan Sequeira]

Where can I download the Linux Platform Kit on IA-64 for the EVA3000?

The link bellow seems to only conatin the IA32 version.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=359879&locale=en_US&taskId=135&prodTypeId=12169&prodSeriesId=315127

TIA

P.S. This thread has been moved from General to Storage Area Networks (SAN) . - Hp Forum Moderator

[Peter Mattei]

Platform Kit EVA 3.0B does also support IA64 systems. See statement below:

EVA3000 Virtual Array
Controller: HSV100
Minimum Firmware: VCS v3.010
Recommended Firmware: VCS v3.010
Connection Name (O/S Parameter): Sun Solaris Host Attach: Linux Platform Kit v3.0B

Note that multipathing (SecurePath) is currently only supported with the following releases:
RH AS 2.1 U2 2.4.18-e.31
SLES8 2.4.19-4GB (v114)

These versions are supported single path only:
RH AS 2.1 U2 2.4.18-e.31, 2.4.18-e.37
RH AS 2.1 U3 2.4.18-e.41 (uni/smp)
RH AS 3 U1 2.4.21-9.EL
SLES8 SP2a 2.4.19-4GB (v114) (v153) SLES8 SP3 2.4.21-128 (uni/smp)

The only supported HBA is:
A6826A Driver 6.06.50 Bios v1.34

Cheers
Peter

[jaime luengas]

We had installed a eva3000 connected to a RX2600 with Red Hat AS 2.1,we can identify the disks as HSV100 withouttype (type unknown) usign /proc/scsi/scsi. Then the disks are not assigned tosd driver.How do I assign the correct driver for the disks?Thanks for your help.JAIME

[Peter Mattei]

use this manual
http://h200002.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_aa-ruhvb-te/TPM_aa-ruhvb-te.pdf
Start at Chapter 2.

Cheers
Peter