HPE EVA Storage
1833103 Members
3387 Online
110051 Solutions
New Discussion

Re: msa 1000 firmware upgrade on openvms

 
smittw
Occasional Visitor

msa 1000 firmware upgrade on openvms

Can some one tell me the procedure to upgrade firmware on an MSA1000 usinf msa_util.

I need the commands to connect etc
Also can I access the msa while the sys is up.

1 REPLY 1
Jefferson Humber
Honored Contributor

Re: msa 1000 firmware upgrade on openvms

William,

Try here for an upgrade guide;

http://h50055.www5.hp.com/campaign/simply/hk/en/myfirstsan/whitepapers/ReleaseN_MSA1000.pdf

In my experience you don't want the OpenVMS to have any of the LUN's presented by the MSA mounted.

MSA_UTIL is a bit rough around the edges, but does the job of flashing the firmware OK. I which HP would spend some time making this tool slightly better, for instance not all the CLI commands are supported at present. I know the tool lives in SYS$ETC (unsupported area), but it would be nice if it could be made more useful.

Good luck,

Jeff
I like a clean bowl & Never go with the zero