HPE EVA Storage
1825737 Members
2552 Online
109687 Solutions
New Discussion

Recommended free space on EVA4400

 
SOLVED
Go to solution
noodles
Occasional Contributor

Recommended free space on EVA4400

Hi,

we have a EVA4400 with one Diskgroup and two vDisks.

When creating a new vDisk the system shows me how much capacity is free.

Is there a statement how much free space there should be left on a EVA or can I can consume every single byte?

Thanks in advance.

regards
2 REPLIES 2
Víctor Cespón
Honored Contributor
Solution

Re: Recommended free space on EVA4400

Minimum to allow leveling and rebuild is 5 GB, but you should leave more than that.

In the disk group properties there's a parameter called Disk failure protection. Single reserves the space equivalent to 2 x (biggest disk on disk group), and that space is reserved to be able to rebuild in case a disk fail.

Having too little disk space free means that when a disk fails, the rebuilding process will not be possible until you physically replace the failed disk.

With 450 GB FC disks and 1 TB FATA disks, you need a lot of space to rebuild.
Amar_Joshi
Honored Contributor

Re: Recommended free space on EVA4400

Best practice recommendations are to keep the utilization below 90% in the diskgroup.

Simple to understand is that per 8 disks you should spare one disk equal space. E.g. if you have 24 disks (450GB each) then you should atleast leave ~1.5TB space unused in that diskgroup.

As mentioned, this space is breathing space for the diskgroup that will serve the disk group in the events of releveling, disk-failure and rebuildings.

Hope that helps.