HPE Community
HPE EVA Storage
1833589 Members
3976 Online
110061 Solutions
New Discussion

Re: Secure Path cannot see the HBA'S---> qlogic

 
Pawan_1
Frequent Advisor

‎10-27-2005 05:04 AM

‎10-27-2005 05:04 AM

Secure Path cannot see the HBA'S---> qlogic

We are running Windows 2003 servers and autopath command does not see the QLOGIC HBA'S.

We have updated the drivers and still no luck.


Any ideas
0 Kudos
Reply
2 REPLIES 2
Steven Clementi
Honored Contributor

‎10-27-2005 05:20 AM

‎10-27-2005 05:20 AM

Re: Secure Path cannot see the HBA'S---> qlogic

Pawan:

Does Windows see your HBA's?

Secure Path generally does not show you HBA information, rather... it shows Storage Path information. If you haven't presented any disks to the server, it is likely that SP will show you nothing.

What kind of storage system do you have?


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
0 Kudos
Reply
Pawan_1
Frequent Advisor

‎10-27-2005 05:23 AM

‎10-27-2005 05:23 AM

Re: Secure Path cannot see the HBA'S---> qlogic

The Windows does show the LUN's presented to the Server. But when you issue the autopath commands:

autopath devices
or
autopath adapters

There is no entry

We are using HDS Tagstore [ USP ] Storage
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.