secure path target/LUN

[Nabil Boussetta]

i have an eva5000 connected to two rp8400.
secure path 3.0f is installed under hpux 11.11

the target/LUN 1/0 is available on two nodes.
when adding new Vdisk and presenting this Vdisk to two nodes. node1 used this tgt/lun but node2 uses another one.

i have deleted the device from secure path config by doing : spmgr delete device

i have added the device another one and specifing tgt/lun : spmgr add device 1 0

secure path has added the device to another tgt/lun

what to do to add this device to the tgt/lun 1/0

P.S. This thread has been moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

[Luk Vandenbussche]

Nabil,

I think it is best to restart the server or / and securepath after the spmgr delete.

So al the device files are cleanup properly

[Sagar Sirdesai]

Hi
Once you have delete the LUN Using spmgr delete

Then execute ioscan amd insf -e to cleanup the device files .

[Sagar Sirdesai]

Hi
Once you have delete the LUN Using spmgr delete

Then execute ioscan amd insf -e to cleanup the device files .

Sagar