Storedge 3510 failed connectivity

[jack strenkowski]

I have a rp5430 with the Tachyon XL2 HBA controller installed. I have the fiber connected to a SUN storedge 3510 loaded with 12 disks and configured into 4 300gb raid 5 LUNs. The Controller is direct attached to the 3510 in port 0 my problem is that the HP does not see any of the disk devices.

Can anyone determine what i'm missing from the following reports?

here is the fscmutil info:

fcmsutil /dev/td0

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PRIVATE_LOOP
Link Speed = 2Gb
Local N_Port_id is = 0x000001
Local Loop_id is = 125
N_Port Node World Wide Name = 0x50060b0000236b7f
N_Port Port World Wide Name = 0x50060b0000236b7e
Driver state = ONLINE
Hardware Path is = 0/10/0/0
Number of Assisted IOs = 16
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 960
Driver Version = @(#) PATCH_11.11: libtd.a : Jun 28 2002, 11:08:35, PHSS_26799


here is the ioscan report:

fc 0 0/10/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fcp 1 0/10/0/0.8 fcp CLAIMED INTERFACE FCP Protocol Adapter
ext_bus 6 0/10/0/0.8.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface

swlist filesets:

swlist -l fileset | grep -i tach
# FC-TACHYON-TL B.11.11.09 PCI/HSC FibreChannel;Supptd HW=A6684A,A6685A,A5158A,A6795A
FC-TACHYON-TL.FC-TL-KRN B.11.11.09 Fibre Channel Tachyon TL Kernel Library
FC-TACHYON-TL.FC-TL-RUN B.11.11.09 Fibre Channel Tachyon TL User Space files
# PHKL_27317 1.0 detach; NOSTOP, Abort; Psets; slpq1 perf
# PHSS_26799 1.0 Tachyon TL Fibre Channel Driver Patch
PHSS_26799.FC-TL-KRN 1.0 Fibre Channel Tachyon TL Kernel Library
PHSS_26799.FC-TL-RUN 1.0 Fibre Channel Tachyon TL User Space files


Thanks in advance for your assistance.