VC-FC module

[MAH_2]

I want to know how to configure the zoning for VC-FC module with bracade SAN switch....
We are using EVA storage.

[Martin Smoral]

There is NO zoning in the VC-FC module. It uses NPIV. You will do all your zoning in the Brocade, just make sure NPIV is enabled on your brocade. then obtain the WWN's from the VC Server Profiles and use those for your zoning in the brodcade and your Host Ports in CV-EVA.

[MAH_2]

I am facing the performance issue while using the VC-FC module. I tried without zoning the SAN switch. I can see all the server WWN under prot 0 and port 1 of the SAN swtich.Becos I have conncted the 2 Uplinks from VC-FC module to the SAN port0 and Port 1.
But when I present the LUN from the EVA to the host. The LUN performance is very slow and some times the LUN disappear from the host.
So I tried to conncet the Blade FC pass thru , then LUN performance is good.

I want to know any other configuration is needed for VC-FC module.