HPE EVA Storage
1830868 Members
1887 Online
110017 Solutions
New Discussion

Why I always run failed on create host volume in RSM V1.2???

 
Scott Lin
Occasional Contributor

Why I always run failed on create host volume in RSM V1.2???

Hi all,

I used job templates of "replicate host volumes, mount to a host" in windows2003 and gave the correct value to run but always got error message are "No presentation target found for Enabled Host xxx" & "No host bus adapters found for Enabled Host xxx".

Someone can help me to find out this problem?
I found that why the HBAs/Ports and EVA Hosts fields from view properties on Enabled Host is empty?
Is it correct? If not, what's reason and how to fix it.. Does it relate with the run failed?

Best Regards,
Scott Lin
2 REPLIES 2
Matt Tourney
Frequent Advisor

Re: Why I always run failed on create host volume in RSM V1.2???

Scott,

Do you have the RSM Host Agent installed on the server(s) that you are using in your job? All host-related commands in RSM require the host agent to work.

If you are running the host agents on both your source and destination servers, check that you are running HP-provided HBA drivers. For Windows 2003, if you are running a supported storport driver, also make sure that the servers are running SP1.

Matt
huh?
Scott Lin
Occasional Contributor

Re: Why I always run failed on create host volume in RSM V1.2???

Hi,

I already this problem that is installed Emulex HBA driver then can function RSM1.2. The driver download name is "Emulex FCPortKit_2-30a2c-3d.exe". You can download from HP support web site...
Anyway thanks your reply....


Scott Lin