HPE Morpheus VM Essentials
1836645 Members
1590 Online
110102 Solutions
New Discussion

Management network changes to "non-active" automatically

 
shiba9967
Occasional Advisor

Management network changes to "non-active" automatically

HVMをデプロイすると、「Management」というネットワークが自動的に作成されます。このネットワークにもVMを接続したいので、「Management」を「アクティブ」に設定しておきたいのですが、手動でアクティブに設定しても、しばらくするとアクティブ状態のチェックが自動的に解除されてしまいます。

VMに管理ネットワークを利用したい場合、マネージャーVMのデプロイ時に「Compute VLAN」の設定は必要でしょうか?マネージャーVMのデプロイ時に指定する「Compute VLAN」の役割が分からないので、必要なら詳細を教えていただけると嬉しいです。

**Google Translate**

When you deploy an HVM, a network called "Management" is automatically created. Since you want to connect VMs to this network, you want to set "Management" to "Active." However, even if you manually set it to Active, the Active status is automatically unchecked after a while.

If I want to use the management network for a VM, is it necessary to configure the "Compute VLAN" when deploying the manager VM? I don't understand the role of the "Compute VLAN" specified when deploying the manager VM, so if necessary, I would appreciate it if you could explain in detail.


スクリーンショット 2025-08-22 184528.jpg

1 REPLY 1
PeterTzvetanov
HPE Pro

Re: Management network changes to "non-active" automatically

 

Hello Shiba9967,

 

the "Compute VLAN" while deploying the VME manager is only to be used if you VME IP is in a VLAN that is outside of the Management Network and assigned in another VLAN. In that case the installer will already create you the compute router + network and put the VME assigned to that VLAN. For example, my ubuntu hosts are running inside of the VLAN6 network with 192.168.6.x and I am tagging them on the bond0.6, while my VME is running in the VLAN7 network with 192.168.7.x. I have defined my 2nd pair of NICs as bond1 and use in the VME Manager setup for the management uplink bond0.6 and enable the "Use Compute VLAN" and enter bond1 with VLAN ID 7. You will see in the /etc/netplan an 61-mvm-compute.yaml file been created. The compute network require always a VLAN ID. But if your VME Manager is inside of the IP range of the management, the "Use Compute ..." is not to be selected.

With regards

Peter Tzvetanov

Support Engineer

**Confidential information erased**

Technical Support Phone Numbers

HPE Operations

You can manage your cases on HPE Support Center



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo