VME Manager Console Install v8.0.8

[jwantland]

I have 3 hosts confitgured with 2 nics with an lacp bond & multiple vLans trunked to ports.

on hpe-vm

i only have 1 option for Locale: C. UTF-8, VC Keymap shows missing keymaps.  If i try to install the keymaps, by install kbd, it fails with a gzip error -stdin: unexpected end of file.

The install for the manager goes to 99%, but I can't ping the ip address of the vme manager.

Virtaul machines does show the manager in an off state.  if I try to power on, it fails.

Do I need to remove the vme vm before attempting to re-deploy or will hpe-vm update the network settings of the vm?

For the network configuration of the vme manager, I've tried using an ip address on the vLan of the cluster management ip range.

I've tried several netwrok configuration, but they do not work.

bond with only management vlan for hosts:

bond with 2 vlans defined.  If I run a netplan try, I do see a routing warning:

on the Network Considerations page, how about a configuration with 2 NICS & add a sample netplan configuration?

[PeterTzvetanov]

Hi @jwantland,

on the first question the answer is yes. It needs a cleanup of the networks that are visible on the virsh net-list --all. Also it requires some cleanup of the folders in /var/morpheus/kvm/config and local. For the other problem with the ping and the start up, there are too many details missing, but kind a weird to have 2 VLANs in the configuration. I would suggest you send a mail to hpe-sw-trial-vmessentials@hpe.com and we will look into that surely.

With regards

Peter Tzvetanov

Support Engineer

Technical Support Phone Numbers

HPE Operations

You can manage your cases on HPE Support Center