VME Manager Console Install v8.0.8

[jwantland]

I have 3 hosts confitgured with 2 nics with an lacp bond & multiple vLans trunked to ports.

on hpe-vm

i only have 1 option for Locale: C. UTF-8, VC Keymap shows missing keymaps.  If i try to install the keymaps, by install kbd, it fails with a gzip error -stdin: unexpected end of file.

The install for the manager goes to 99%, but I can't ping the ip address of the vme manager.

Virtaul machines does show the manager in an off state.  if I try to power on, it fails.

Do I need to remove the vme vm before attempting to re-deploy or will hpe-vm update the network settings of the vm?

For the network configuration of the vme manager, I've tried using an ip address on the vLan of the cluster management ip range.

I've tried several netwrok configuration, but they do not work.

bond with only management vlan for hosts:

bond with 2 vlans defined.  If I run a netplan try, I do see a routing warning:

on the Network Considerations page, how about a configuration with 2 NICS & add a sample netplan configuration?