FAN error on a nimble array Cs1000

[FAN1_error]

I have damage fan in a nimble array, but it is in a remote location and wondering if there is a command to get the part number for the FAN as I can't validate phisically.

Regards

[FAN1_error]

HEAD SHELF  MODEL CS1000 

[Mahesh202]

Hi

Please run this command to locate the fan and the details of it -- > shelf --info {shelfSerial} --array {arrayName}

There are four field replaceable mid-plane fans, two for each slot, A and B as well as two fans are (NOT field replaceable) directly attached to the controller/expander

To check which fans are faulty, please run the below commands.

To check the controller info run the command --> Ctrlr --info ctrlr_name

To validate the fan running at good RPM run the command (to locate the fan)--> Shelf --info shelf_serial

If you require replacing the fan, I suggest you contact the HPE Nimble tech support with all the information of the commands and they will help resolve this.

I hope this helps.!!

Regards
Mahesh