HPE OneView for VMware vCenter (HSM)

[LucaM2]

Hi all, we have the version 8.9 OneView and 11.6 ov4vc installed, but the SPP installation is not working from there. Just recievieng following error in vCenter. Without SPP its working and directly from OneView also. Addon and ESXi Version is the latest.

7/24/2024, 9:54:02 AM:Skipping remediation of host 'HOST1.local.net' due to potentially transient reasons. The operation will be automatically retried as per the cluster remediation delay and retry settings.
07/24/2024, 9:54:02 AM:Hardware update action: 'STAGE_UPDATE' for host 'HOST1.local.net' 'FAILED' on HSM 'HPE OneView for VMware vCenter'.
07/24/2024, 9:53:28 AM:Started Hardware Update action: 'STAGE_UPDATE' for host 'HOST1.local.net'

..is this working for someone ?

[support_s]

System recommended content:

1. HPE OneView for VMware vCenter 11.5.0 User Guide | Supported images and add-ons in VMware vSphere Lifecycle Manager

2. HPE OneView for VMware vCenter Grow Cluster White Paper (9.0)

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[sdi89]

We have OneView 8.7 and experience the same issue..

Don't know what we should do with the two links posted above...

[MV3]

Hello,

Check the isut settings on the ESXi hosts.

vLCM Remediation Update Fails for Possibly Transient Reasons

https://blogs.vmware.com/virtualblocks/2020/11/19/vlcm-remediation-update-fails-for-possibly-transient-reasons/

Cheers...

[LucaM2]

vLCM Remediation Update Fails for Possibly Transient Reasons (vmware.com)

thx already checked !

[RenjuCR]

Is this issue istill observed?

Apart from some Transient failures as mentioned above, we have not observed similar issues recently. 

If you are still facing this issue post a retry attempt, do raise a support case and provide us the OV4VC logs.

[LucaM2]

Hello, now we have updated  One View to 9.1 and still the same behavior.

Regards Luca

[RenjuCR]

Sorry to hear that! Please do raise a support case and provide us the needed information about your issue.

[LucaM2]

We found some error message in the ov4vc logs, does anybody know what could cause this.

2024-09-27 11:40:29,089 2852 140515883247360 ERROR vlcm.actions.action_utils stage_action Stage action failed due to OneView Task validation Failure. Error message is [{'data': {}, 'details': 'OPERATION_NOT_ALLOWED_FOR_SCHEDULED_UPDATE_DETAILS', 'errorCode': 'OPERATION_NOT_ALLOWED_FOR_SCHEDULED_UPDATE', 'errorSource': None, 'message': 'The stage and activate actions do not support scheduling and can only be performed immediately.', 'nestedErrors': [], 'recommendedActions': ['Remove the firmwareActivationType parameter from the request before trying again.']}].Task URI is /rest/tasks/f9e361ee-259a-4772-a98e-ff9def469d8c

[RenjuCR · Accepted solution]

Looks like there are some issues with configuration on firmware settings schdule section. Please try to clear that section and configure it refering to the server profile template settings configuration in the OV4VC documentation.

If that doesn't help, we reccomend you to rechout to HPE point of contact for support.