Is it possible to add a server that uses a NAT-IP-adress

[micke_christen]

Hi!

I have a problem to add a server that have a NAT-adress.

The OneView server have IP: 194.29.xxx.xxx.  We adding the server with IP: 172.31.xxx.xxx that is NAT-translated to 10.232.xxx.xxx .

OneView server started to discover the server and found some infon. But it seems that OneView reads the IP from iLO and started to "talk" to the iLO on that address instead. But 10.232.xxx.xxx is not accessible from the OneView server.

See attached picture

[ChrisLynch]

Unfortunately, no.  The iLO must be reachable using its non-NAT IP address.

[bubbafrombama]

This seems silly. iLO Amplifier had no issue doing this.