Oneview 6.4 & ILO 3

[Scott80]

Hi,

I am setting up a new Oneview 6.4 instance and having a problem discovering our Proliant DL360 Gen 7, ILO 3 servers which run Windows Server.

The server have the HPE Management Agents installed, SNMP service is running on the server, ILO 3 is configured with SNMP pass-thru enabled. SNMP Read Community String specified on the Oneview Appliance Settings screen is the same as is specified on Windows SNMP Service Trap tab.

Is there anything else which needs to be configured to allow Oneview to add the Gen 7 servers?

Thanks

[DanCernese · Accepted solution]

Ensure you have the default standard encryption or AES/3DES as mentioned in the HPE OneView support matrix for iLO3

[Scott80]

Thanks Dan, this fixed my issue