OneView Firmware Compliance showing old baselines.

[Matthew_W]

Hey so I've got OneView on my appliance (firmware version 6.60.00-0455762) and I've got some interconnects (SAS, 16Gb FC, VCSE 40Gb F8) a compute module, and storage module.

I've updated them all using the SPPs, and had to gradually update some by using multiple older SPPs.

Now that I've got everything up to date, I look at my firmware compliance and unless filtering for only the latest baseline I've used, OneView is showing that my components require an update - but it's trying to tell me that they require an update to older versions of baselines which no longer exist.

Is there a way to clear these from the Firmware Compliance so the only (and newest) baseline is shown?

[support_s]

System recommended content:

1. Advisory: HPE OneView - The Firmware Compliance Report Will Display Incorrect Compatibility Information for Gen9 and Gen10 Servers in OneView

2. HPE OneView Global Dashboard 2.5 User Guide | Firmware compliance report

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[ChrisLynch]

Have you removed the older SPP's?  If not, you should.  However, older SPP's shouldn't be flagging compliance notifications, as they contain older components.  Do you have any screenshots you can share of this behavior?

[Matthew_W]

I have indeed removed the older SPP's

Here is a screenshot of my firmware compliance page

https://i.ibb.co/fk88Nkf/One-View-Firmware-Compliance.png 

As of this time, HPE SSP SY-2022.02.01 is the only SPP installed

I've expanded two components showing an update for my 3820C 10/20Gb CNA and a SAS module showing older versions being "available"

[ChrisLynch]

What OneView version is your Composer running?

[Matthew_W]

running version 6.60.00-0455762

[ChrisLynch]

Thanks.  I'm looking more into this.

[Bob Curnock]

Hi,

I am also seeing this on 6.60 for VM - see below that currently installed firmware is equal to or newer to that in the deleted bundle -