OneView Network creation

[JeffD55]

I am planning to implementing a cutover from a mapped network of 5 VLANs to a new network with over 2000+ VLANs.  The current uplink set utilizes split cables to 10Gb ports on the old network.  Cutover to new will use the 40Gb ports.  Is there a way to bulk create the networks in OneView?

[Ashutosh_D]

Please refer HP OneView API reference guide for more information ( Ethernet -Networks )

http://h17007.www1.hpe.com/docs/enterprise/servers/oneviewhelp/oneviewRESTAPI/content/images/api/index.html#rest/ethernet-networks

[Ashutosh_D]

Please find the information related to Maximum number of Networks defined as per OneView 4.0 support Matrix.

https://support.hpe.com/hpsc/doc/public/display?docId=a00037744en_us (Page -30)

Table 18: Network configuration maximums
Resource Maximum
Tagged, untagged, tunneled, and FCoE
networks defined
8,192
Provisioned Ethernet networks per logical
interconnect
1,000
Native FC networks (including FCoE/FC
bridged networks), that can be defined
255
Fibre Channel networks per interconnect 8
Fibre Channel networks per logical
interconnect or enclosure
48
Total SNMP trap destinations per logical
interconnect of which up to 5 can be
designated as Fibre Channel.
25
Networks per logical interconnect or enclosure 1,048
Networks per physical downlink 162
Networks per uplink set 1,000
FCoE networks per uplink set or per
interconnect
32
Maximum number of private networks per
logical interconnect
128