Query: Unable to add Network Sets on the Logical Interconnect Group

[SuryaKrishna]

I am unable to add the Network Sets to Logical Interonnect group. I have Server profile templates with different Network Set . I am able to add only one Network Set to the Uplink Sets. When I try to add the other it says no Network Sets available eventhough there are three Network Sets defined. I have only one Uplink sets 

Also I noticed I am not able to add Network to these Network Sets. I am running 9.1 Oneview and all the firmwares were upgraded in Dec.

Any Help on this is greatly appreciated

[Greeshma21]

Hi @SuryaKrishna 

Here are the Steps to Add Network Sets to a Logical Interconnect Group:
1. Log in to HPE OneView
2. Navigate to the Logical Interconnect Group
3. Select the Logical Interconnect Group
4. Edit the Logical Interconnect Group
5. Configure Network Sets
6. Click "Add Network Sets"
7. Save Changes

After saving, verify the configuration by reviewing the "Network Sets" section again to ensure the new network sets have been added to the LIG.

For more info, please refer to this HPE OneView user guide.
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005251en_us&docLocale=en_US&page=s_logical-switch-templates-edit.html

Regards,
Greeshma

[SuryaKrishna]

Thanks for your response Greeshma. When I try to add Network Sets the liist is not getting populated and it says not available even though there are 3 Unused Network Sets which is part of my  Server Profile template

[Greeshma21]

Hi @SuryaKrishna 


I suggest checking if the network set is compatible with the server profile template you are trying to associate it with. There could be conflicts regarding network configurations (such as VLAN settings) between the network set and the server profile template.

Regards,
Greeshma

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".