Primera Add Disk

[Account1]

I would like to know about the operation when adding a disk to Primera. Is it necessary to do the following after physically adding a disk?

Run admithw command
Run tunesys command

Also, I have an additional question,
Regarding volume expansion, I understand that if the target volume is thin provisioned, it can be expanded immediately after admithw is completed, is this correct?

I understand that Primaera does not support Thick Provisioning.

Best regards,

[sbhat09]

Hello @Account1,

Direct answers to your queries:

1. admithw is required. tunesys is not.

2. After admithw, you can use the diskspace as you need, for volume expansion.

3. Yes, HPE Primera doesn't support thick provisioning.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.