HPE Simplivity change subnet

[ChrisWangHAHAH]

Hello,

We have 2 set (A &B ) Simplivity 4 nodes(2 vCenter linked mode & 2nodes per vCenter) and Run RapidDR.

A Simplivity is 10.1.2.X/24 subnet, B Simplivity 10.1.8.X/24 subnet.

We would like to change the B Simplivity with vCenter to 10.1.10.X/24 subnet.

How can I change the B Simplivity enviromnentand the Step?

How to update the federation wait out MVA in both Simplivity?

Many thanks.

Chris Wang

[support_s]

System recommended content:

1. R12xx-HP 10500 Switch Series Layer 3 - IP Routing Configuration Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Aditya_A]

Hi,

Please let me know which network subnet is subjected for subnet change. Is it Management, Storage or Federation network?
Moreover, you'd need to engage support to make these changes as If not done properly, it may lead to data unavailability scenario.
I am attaching a snip from the OmniStack Administration Guide (Page 22).

[Aditya_A]

Hi,
Please let me know if you have further queries.