Migrate Simplivity Arbiter

[TechComas]

Hello,

i will change the physical Windows Server i use as arbiter.

I search a process to do it flawlessly.

Could you please confirm this :

- Shutdown old Server

- Install Arbiter service to new server

- Use this command on each ovc

dsv-arbiter-instance-set --address x.x.x.x

Thats all!

Thanks in advance

[giladzzz]

Hi

you only need to run the command once

and then check

svt-federation-show

Regards

[Mahesh202]

Hi TechComas

To Change the Simplivity Arbiter IP Address
Run the below commands.

1. dsv-arbiter-instance-set --address <arbiter IP address>

or

svt-arbiter-address-set
–-address <arbiter IP address> --datacenter <datacenter
name>

2. Enter:
psql -c "select * from storage_cluster"

or

svt-federation-show -–output xml
and confirm the

<arbiteraddress>

is updated with the new IP address.

Please refer to the KB Article using the link

Hope this helps.!!

Regards
Mahesh.

[TechComas]

Hello,

Thanks.

Only once on an OVC and it will propagate to the other ?

[TechComas]

Hello,

It helps a lot.

The link dont work.

[Mr_Techie]

Hi @TechComas,

I have checked the link, it's working fine. Getting any error? 

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Per_Johansson]

Hello.

Is windows server 2025 supported to run arbiter?

Kind Regards

Per