SImpleVity 3.7.10.200 Deployeement

[Ravindra7]

ERROR: Step 10 of 42: ERR_DPLY_TIMEOUT_BOOTING_HYPERVISOR:Time out occured while waiting for thehypervisor to boot 192.168.1.201

[Deepak_K]

Hi Ravindra,

Thank you for writing us. Please find the below steps which will help you on deploying the SimpliVity nodes.

1. If you are deploying the node in an existing cluster. Then the existing SimpliVity nodes must be healthy.

2. Check the model of the SimpliVity node if it can be deployed in an existing cluster because if the SimpliVity nodes you are trying to deploy are of different model then you may not be able to deploy them in a same cluster. You may have to create a new cluster and deploy. Please refer Page No. 17 (HPE OmniStack Host Interoperability Within and Across Clusters) in the below interoperability guide link:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00038559en_us

3. Ensure that the factory reset image is not corrupted

4. Boot the server to Intelligent Provisioning and select Smart Storage Administrator

5. Select the rear RAID controller mostly E208i

6. Click on "Configure".

7. Click on "Set Bootable Volume"

8. Ensure that the correct primary boot volume is selected

9. Save and restart the server

9. Ensure that the date and time in iLO and in the BIOS is set to UTC(Greenwich Meridian Time)

10. Ensure the BIOS settings are set correctly. Please check the below documents link:

SimpliVity DL380 Gen10:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sf000046208en_us

SimpliVity DL380 Gen9:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sf000044502en_us

11. Ensure all the network ports are opened. Please refer Page No. 23 to 26 (Ports required for HPE OmniStack hosts) in the below document link:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00080603en_us

12. Ensure that the windows firewall and anti-virus is turned off on the windows machine where you are running the Deployment Manager

13. Please read all the information/instructions provided in the below document before performing the deployment:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00080603en_us

If the issue remains the same even after performing the above steps. You may reach out to the SimpliVity Technical Support team. Provide the serial number of the server so that a support ticket can be raised accordingly.