HPE SimpliVity
1824995 Members
2328 Online
109678 Solutions
New Discussion

Re: TPM 2.0

 
Convergo
Frequent Advisor

TPM 2.0

Are SimpliVity DL380 Gen10 G or Gen10 Plus nodes supported for adding and using TPM2.0 ?
Currently these nodes dont have a TPM2.0 module.

As we understand TPM2.0 is a requirement for using secure boot in 5.2.0

4 REPLIES 4
Harshitha_K
HPE Pro

Re: TPM 2.0

Hi,
Yes, TPM 2.0 is supported for DL380 Gen10 and Gen10 plus.
TPM 2. 0 is required for Secure boot mode which is UEFI and Legacy boot mode.

When enabling the Trusted Platform module, observe the following guidelines:

  • By default, the Trusted Platform Module is enabled as TPM 2.0 when the server is powered on after installing it.
  • In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0 (default) or TPM 1.2.
  • In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM 1.2 and TPM 2.0 (default), but only TPM 1.2 operation is supported.

For more information, please refer this guide. 

Thank you!
Hope this information has helped you, please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Sahana_S
HPE Pro

Re: TPM 2.0

Hello @Convergo ,

Starting with HPE SimpliVity 5.2.0, support for UEFI Secure Boot for virtual machines and VMware ESXi hosts is enabled through Trusted Platform Module (TPM) 2.0.

Thanks,
Sahana S



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Sahana_S
HPE Pro

Re: TPM 2.0

Hello @Convergo ,

Please let us know if your concern has been addressed, if yes, then kindly mark this post as 'Accepted solution' so that it is helpful for all community members.

Thanks,
Sahana S



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Convergo
Frequent Advisor

Re: TPM 2.0

Hi,

Support reverted back on this question:

The TPM 2.0 module

In case both nodes do not have the TPM 2.0 module installed, which means that you would need to purchase ones first from HPE to install to the motherboards to clear the first requirement of enabling secure boot.

For Gen 10 server only:

SKU # 864279-B21

HPE Trusted Platform Module 2.0 Gen10 Option

The HPE Trusted Platform Module 2.0 for Gen10 is compatible with supported HPE Gen10 servers only.

For Gen 10 plus servers only:

SKU# P13771-B21

HPE Trusted Platform Module 2.0 Gen10 Plus Black Rivets Kit

The HPE Gen10 Plus TPM BR(Black Rivets) Module Kit is compatible with HPE Gen10 Plus Synergy, Rack and Tower servers