ILO offline after mistyping static ip address

[Kerry Quillen]

We discovered that one of our ILO's had a static ip assigned that belonged to another device.  When setting a new ip for the ILO, it was mis-entered and now the ILO is offline.  I can't figure out a way to access it to correct the ip.  

[Dane_L]

What type of server?

[rabindra11sharm]

Dear Kerry Quillen 

Earlier It was not heard by me for this type of issue. like iLO dissable, any ways can you help me to know your server model no. and how you can change your iLO IP. So we will be able drive you in aproper way to get back your iLO access

.

[Kerry Quillen]

Synergy 480 Gen10

[rabindra11sharm]

Dear  Kerry Quillen

Please change the ILO IP by below given steps. aftyer that assign in one view.

Access the iLO Configuration Utility:

• Power on or restart the HPE Synergy 480 Gen10 server. 
• During the server's POST (Power-On Self-Test) sequence, press the F9 key repeatedly to enter the BIOS settings. 
• Navigate to System Configuration using the arrow keys and press Enter. 
• Select iLO 5 Configuration Utility (or similar for your iLO version) and press Enter.
  • Select Network Options or a similar setting. 
  • If DHCP is enabled, disable it by toggling the setting to Off. 
  • Enter the desired IP address, Subnet Mask, and Gateway IP address.
• Press F12 to save the changes and exit the iLO Configuration Utility. 
• Confirm any prompts to reset the iLO. 
• After the server reboots, you should be able to access the iLO using the newly configured IP.

Hope, I could provide you with clear and helpful instructions. If you have any more questions or need further assistance, don't hesitate to ask. I'm here to help! Have a great day!!

[Kerry Quillen]

Rabindra - thanks for the info but I cannot access the ILo at all so there is no way to press F9.  I did find an artcle last night saying that by SSH'ing into the composer will allow console access.  Trying that this morning