Need to move Sy480 Gen10 without changing WWPN

[Chris_Coates]

I have 4 frames with a single logical enclosure and a single logical interconnect. I need to move one SY480 from one frame to another without the WWPN changing.

Will the compute unit keep the WWPN, or is there something I will need to do?

Thanks

[ChrisLynch]

Is this target frame within the same management ring? If so, you need to assign the profile to the destined bay and physically move the node.

If no, then you need to recreate the server profile. When you do, you can provide User Specified address, and provide the original WWPN. Keep in mind that there is no way for the two independent Composers to know if those addresses are still in use or not. So you do run the risk of pots tially duplicate addresses in the future.

[support_s]

System recommended content:

1. HPE OneView 9.3 User Guide for HPE Synergy | Direct-attach Fibre Channel networks

2. HPE OneView 9.4 User Guide for HPE Synergy | Direct-attach Fibre Channel networks

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.