Reimage the HPE Synergy Composer appliance

[Tdawod]

Dears

We need to reimage the HPE Synergy Composer appliance and install HPE OneView on our HPE Synergy 12000.

We have downloaded HPE_Synergy_Composer2 (file: HPEOneView-Composer2-6.60.07-0487691.gz), extracted the compressed image, and copied its contents to a USB flash drive. After that, we pressed the reset button.

We need guidance on the following:

1. Steps to reimage the HPE Synergy Composer appliance and install HPE OneView.
2. Instructions for creating a bootable USB flash drive for the reimaging process.
3. Required file formats and extensions for the USB flash drive.
4. Specifications for the USB flash drive (capacity, format, etc.).

Looking forward to your support.

[support_s]

System recommended content:

1. HPE Synergy Migration Guide (for Composer and FLMs) | Reimaging each HPE Synergy Composer2

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[DanCernese]

You want the "HPE Synergy Appliances Maintenance and Service Guide for HPE Synergy Composer2"

https://support.hpe.com/hpesc/public/docDisplay?docId=a00090211en_us&docLocale=en_US

You do not "install" HPE OneView; that's what a reimage operation is.  It puts the firmware (OneView) onto the Composer.

The USB is not bootable.

You mention extracting the compressed contents:  did you put all of the files onto the USB?  It requires all of the files, not just the large one.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".