Resey Synergy composer HPE 12000

[woowoo]

I'm dealing with an HPE Synergy 1200 that we acquired from a leasing arrangement. Unfortunately, the Synergy Composers are password-protected, and we can't access or configure the equipment. Is there a way to reset the Synergy Composers? We tried following the HP process, but it didn't work because all options are blocked, including the password reset option. We attempted to obtain the authorization code to reset the password from HP, but they requested that we renew the contract. Has anyone encountered this problem before and can help, please?

[DanCernese]

Clearly if you want support you should pay for an HPE Services contract.  I can point you in the right direct though, find the documentation on how to "reimage" a Synergy Composer.  However, if you can't login to HPE's support web pages to download the images you're at a total dead end.

[woowoo]

Thanks for your support. Actually, i have the access to HPE Portal, how can i do to reimage the synergy composer. To download the image, it must be the same image (veridon) to the composer?

[support_s]

System recommended content:

1. HPE OneView 8.0 User Guide for HPE Synergy | Reset an interconnect in an HPE Synergy 12000 Frame

2. HPE OneView 8.9 User Guide for HPE Synergy | Reset an interconnect in an HPE Synergy 12000 Frame

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[woowoo]

We've done all of this but it simply doesn't work if you don't have administrator access. All these options were locked with the administrator password. My question is if there is another way to reset the password, will re-image the composer work?We already do these steps

[DanCernese · Accepted solution]

Reimaging a Synergy Composer wipes out everything on them and comes with a default set of credentials you are required to change on initial login and first time setup.  The defaults are contained here (towards the end):  https://support.hpe.com/techlib/docs/synergy/shared/setup_overview/index.html

[Rakesh0404]

Hi , 

Please follow the steps mentioned by the previous expert and let us know if you need any further assistance.

[Rakesh0404]

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

[woowoo]

Hello everyone,

Apologies for not responding sooner; I was out of the office for the past few days. I was able to reset the Synergy Composer. First, I attempted to update to version HPE_Composer_3.10.07, but encountered the error: "The appliance signature is not valid. Retry the reimage process with a USB that contains a properly signed appliance image. The reimage of the appliance encountered errors and could not complete." I then tried with version HPE_Composer_4.00.10, which worked perfectly.

Thank you all for your support.

[DanCernese]

"I then tried with version HPE_Composer_4.00.10, which worked perfectly."

That's great news.  However, I am extremely curious why you would use a version that has been out of support since June 2019 ?  Seriously, even if it was a Composer (1st gen) you could at least start with 6.6

[woowoo]

Sure, I will do that. As The synergy composer had the version firmware 3.0, first I update to version 4, and then I will upgrade gradually to the latest version.

[DanCernese]

Just as a point of clarification:  you can reimage to the latest version, there is no need to upgrade a newly imaged composer since there is no data or configuration to preserve.  Unless your purpose is to learn and experience the many days (yes, full days) of non-stop upgrades.