Use Same Networks and Network sets objects in two VC module

[nitinb]

Dear HPE,

We have an 3 Synergy chassis configuration interconnected with ILM modules in a single LE configuration.

A set of VC modules are installed in slot 3 /6 (PROD) and 2 /5 (DMZ) across two chassis.

Different Server Profiles use different network/Network sets objects to reach out to TOR switches  via different VC modules uplink set and uplink ports.

Question: Can we use the same Networks/Network sets used in VC 2/5 uplinkset in VC 3/6 with new uplinkset to form a new DMZ configuration. What is the system impact of this chnage when prodction is running?

[ChrisLynch · Accepted solution]

Yes, this should be allowed.  What you cannot do is create multiple uplink sets with the same networks to multiple uplink sets to the same logical interconnect.  Since you have different physical adapters connected to different physical interconnects, there is nothing that would cause assignment issues with either server profile connections or uplink sets.

[nitinb]

Thanks  a lot Chris.