Using Ceph with VME

[dya]

I want to try configuring HCI without using shared storage.

I think Ceph is supported, but I don't know how to do it.

Do I have to use commands to build a Ceph cluster on the host that will be part of the VME cluster, create an RBD, etc., just like when it's not related to VME?

I would like to know how to configure HCI using Ceph.

*Sorry if this is hard to understand, as it is machine translated.

[Ranveer · Accepted solution]

Hello  
Doc. https://hpevm-docs.morpheusdata.com/en/latest/infrastructure/clusters/mvm.html?highlight=raid 
says
Do not raid disks on physical servers. Currently, only one data disk may be used, which is given in the DATA DEVICE configuration during cluster setup. In the very near future, an update will be provided to allow multiple data disks to be used. These will be added to the total Ceph storage in one large volume. Until that update, only one data disk may be given in the configuration.

Best Regards

[dya]

It seems there are still limitations to using Ceph.
I'll wait.

Thank you.