Changing SNMP port in IMC - Redbox monitoring

[pattap]

I've started experimenting with Redbox recorders in IMC, I've noticed whenever I try to contact redbox via SNMP I'm not seeingany response back, I'm running capture on IMC server. I've read somewhere that redbox uses 1161 port for SNMP. The only place to change SNMP port I can see is in system>system settings. Is there a place where this can be changed per vendor/device basis?

[jguse]

Hello,

If you are on one of the latest versions of iMC, you should be able to adjust the SNMP port per-device. It's on the Device Details > Configure > Modify SNMP Settings. There's an option there for 'Port Number' that you can adjust as needed. Resource > Batch Operation > SNMP Settings can also be used to change this for multiple devices at once.