Does IMC NTA support HP E5500G (Ex 3Com SuperStack 4 5500G-EI)

[SINDIBADE]

Hello,

Please I looking for a confirmation for IMC NTA support for 3Com Superstack 4 5500G-EI switches?

What are the requierement to get Traffic Analysies using IMC/NTA on this plateforme?

Regards

Adil TALEB

[netmanchris]

The e5500g actually doesn't support sFlow, so the answer there would be "no". :) I've tested IMC with sFlow form HO switches, Netflow from Cisco routers, as well as Juniper sFlow. all are fine. Hope this helps! @netmanchris

[fgiraud]

Hello,

I have a HP 550 24G EI device (Software Version 5.20 Release 2210) and I could configure SFlow on it :

""""

[5500-1]sflow agent ip 10.10.150.65

[5500-1]sflow collector 2 ip 10.10.0.14 description "F. GIRAUD Collector"

[5500-1]interface GigabitEthernet 1/0/16
[5500-1-GigabitEthernet1/0/16]sflow sampling-rate 1000
[5500-1-GigabitEthernet1/0/16]sflow flow collector 2
[5500-1-GigabitEthernet1/0/16]sflow counter interval 10
[5500-1-GigabitEthernet1/0/16]sflow counter collector 2

[5500-1-GigabitEthernet1/0/16]quit

[5500-1]interface GigabitEthernet 1/0/16
[5500-1-GigabitEthernet1/0/16]sflow sampling-rate 1000
[5500-1-GigabitEthernet1/0/16]sflow flow collector 2
[5500-1-GigabitEthernet1/0/16]sflow counter interval 10
[5500-1-GigabitEthernet1/0/16]sflow counter collector 2

""""""""""""""""""""

And I defined one Interface Traffic Analysis Task on my IMC - NTA server and it works fine (see attached snapshot).

Regards, Fabien