Topology Map links

[Mbaadk]

Hi all...

Is it possible to keep inactive links present on the topology map, after they have been disconnected.

We have a hugh STP ring on ring topology, and when a fiber link goes down, it's easier for operations to look at the topology map to see where the issue is.

Michael

[NeilR]

these settings might possibly help you:

System > System Settings > Layer 2 Topology Configuration (midway down the page)

[johnk3r]

I have the same question.

How to display the blocked ports by STP innetwork topology.

[rafter_1]

If there is a "loop" usually iMC draws a little circle at the top of the switch icon - get rid of the loop/block and the icon changes (after a sync).  I'd also be interesed how to alert on this instead though...