Is it possible to have this memory configuration in one rx7640?

[Carme Torca]

Hi,

I have one server with this configuration

2Gb + 2Gb

2Gb + 2Gb

2Gb + 2Gb

2Gb + 2Gb

And I want to put 16Gb more like:

2Gb + 2Gb

2Gb + 2Gb

2Gb + 2Gb

2Gb + 2Gb

4Gb+ 4Gb

4Gb+ 4Gb

Is it possible? It's correct?

Thanks a lot of?

Carmen.

[Pete Randall]

I'm going to take a wild guess that you're talking about memory????  EDIT:  If I'd pay any attention to the title, I wouldn't need to make dumb guesses!

You need to follow the rule that the highest density [SD}IMMS go in the lowest numbered slots, so no, your desired configuration is not correct.

[S_Logan]

Hi,

Please see the memory loading rules:

Memory Loading Rules:

 -Memory must be installed in pairs - modules (2 DIMMs of equal density)

 -Memory modules (pairs of DIMMS) are available in three densities: 4 GB (2×2048MB), 8 GB(2×4096MB), and 16 GB (2×8192MB).

 -Memory bundle product numbers consist of DIMMS already qualified in the memory modules.

 -Minimum memory is 2 GB per cell

 -Maximum memory per system is 256 GB-using sixteen 16 GB memory modules (8 GB pairs) persystem.

 -Larger DIMMs must be loaded first across a cell, followed by progressively smaller DIMM sizes.

 -On each cell board, Memory Pairs must be installed in the following order: (0A, 0B), (1A, 1B), (2A, 2B), (3A, 3B), (4A, 4B), (5A, 5B), (6A, 6B),(7A, 7B)

 -DIMM mixing other than recommended configurations is supported as long as the memory loading rules are followed.

Please find the image(Recommended Memory config)

HTH

Surendar