No hard drive information in system heath

[hoangnguyen]

Hi,

I'm using 02 HPE Integrity rx2800 i2 Servers.

I access to server system heath via iLO3 in order see status of server components but there is not any information  about hard dirves. 

Does any one know the reason, and how can I see my HD?

Thanks.

[Torsten.]

Running HP-UX?

Smart array controller in RAID mode?

Do

ioscan -fn

and look out for the ciss device.

Then do

sautil /dev/ciss0

saconfig /dev/ciss0

[hoangnguyen]

Hi, thanks for reply.

My server are running under OpenVMS.

 My RAID type is RAID10.

You know I tried to access to ist iLO port from Windows, i can see other components except hard drives.

Can you help me? 

[jsm6]

Hi,

I doubt, you will be able to see the raid info/drives from ILO.

To view details about SAS/RAID info under p410i controller (embedded), you may see the info either from,

1.Orca (during boot and entering into Orca)
2.From OpenVMS using "MSA$UTIL.EXE" utility.

$ MC MSA$util
MSA> Show Controller
MSA> Set Controller
MSA> Show Controller
MSA> Show Disk
MSA> Show Disk/Full
MSA> Show Unit/Full
MSA> Exit

Also refer https://vmssoftware.com/pdfs/HP_branded_docs_1st_batch/HP_OpenVMS_SysMgmt_Utilities_Ref_Manual_Vol2.pdf

http://h30266.www3.hpe.com/odl/axpos/opsys/vmsos84/6048/6048pro_index_006.html#index_m

Thanks and Regards.

[hoangnguyen]

Hi,

Thanks, I will try and let you know the outcome.

[jsm6]

Hi,

May i know if you are able to find the requested info using commands suggested?

Thanks and Regards.

[hoangnguyen]

Hi,

I tried the first command: $ MC MSA$UTIL, but it failed. I got the following message.

May be my account doesn't have audit privilege.

Do you think that it is unable to see disk information from iLO port with this type of server?

Please help more.

[jsm6]

Hi,

Yes the user need privileges to run the utility and OS is the only place to check.

And from ILO, you cannot see raid card/ disk details for rx2800 i2.

Thanks and Regards.

[hoangnguyen]

Hi,

In fact that I'm processing the case in this link: https://community.hpe.com/t5/integrity-servers/failed-to-insert-new-disk-into-hpe-integrity-rx2800-i2-server/td-p/7089619#.XtDVZ1QzbIU

That why I created this discussion.

Please help me case in the link above.

Thanks. 

[jsm6]

Hi,

I have replied in the other link.

Thanks and Regards.