UDID - how to change on BL860

[Tricia1]

Migration to new storage and need to set/standardize the $1$DGAnnn for 2 SAN storage devices.  System sees the devices and they are setup but now want to change UDID and cannot see how to do it.  In past I know it was WWIDMGR but I do not see the UDID vairiable under the UEFI shell.  What do I use to do this please.

[Tricia1]

BL860c i2/6s - how to change UDID - additional information - using OpenVMS OS

[Steven Schweda]

> [...] Migration to new storage [...]

   Not a very detailed description of your storage systems, new or old.

> [...] want to change UDID and cannot see how to do it. In past I know
> it was WWIDMGR but I do not see the UDID vairiable under the UEFI
> shell. What do I use to do this please.

   What, exactly, _do_ you see, when you do what, exactly?  Copy+paste
is your friend.

   I know nothing about fibre-channel storage, but my quick Web search
for:
      openvms udid
found some documents which suggested to me that such configuration is
done on the storage system, not on the VMS system.

   I'd guess that "wwidmgr" on the VMS console might be used to _show_
such data, but not to set them.  (But what do I know?)