HPE Community
LAN Routing
1832868 Members
2888 Online
110048 Solutions
New Discussion

How to config MSR 20-20 router ?

 
hhlin
New Member

‎05-20-2009 11:53 AM

‎05-20-2009 11:53 AM

How to config MSR 20-20 router ?

Hi,I'm follow the manual to config the MSR 20-20 for web-based management function , but fail browser the router ,even fail to telnet the router.Does anyone help me ? thanks a lot!!

My router configuration as bellow:

version 5.20, Release 1509, Standard

sysname H3C

super password level 3 simple admin

domain default enable system

vlan 1

domain system

access-limit disable

state active

idle-cut disable

self-service-url disable

local-user admin

password simple admin

service-type telnet

level 3

interface Aux0

async mode flow

link-protocol ppp

interface Ethernet0/0

port link-mode route

duplex full

ip address 192.168.2.253 255.255.255.0

interface Ethernet0/1

port link-mode route

interface Serial1/0

link-protocol ppp

interface NULL0

user-interface con 0

user-interface aux 0

user-interface vty 0 4



0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.