Procurve 2626-PoE routing

[Andrew_SEP]

Hi All

I am trying to add a second default gateway on a Procurve 2626, with a higher metric - is that possible?

Alternatively, I want to add multiple routes for the same network, but with different gateways - I am trying to introduce a new router, which is the back up route if the primary (default gateway) fails.

This is my current routing table, and I want to add a new route to 10.10.20.0/24, that goes to 10.10.10.252 (the second router), but with a higher metric:

Destination        Gateway         VLAN Type      Sub-Type   Metric     Dist.
------------------ --------------- ---- --------- ---------- ---------- -----
0.0.0.0/0          10.10.10.254    1    static               1          1
10.10.10.0/24      DATA            1    connected            0          0
10.10.11.0/24      VOICE           2    connected            0          0
10.10.12.0/24      STORAGE         3    connected            0          0
10.10.20.0/24      10.10.10.254    1    static               1          1
127.0.0.0/8        reject               static               0          250
127.0.0.1/32       lo0                  connected            0          0

Any help would be much appreciated.

Thanks,

Andrew.