HPE Community
LAN Routing
1833051 Members
2260 Online
110049 Solutions
New Discussion

V1910 series Multi Gateway

 
Nour_Kattan
Occasional Visitor

‎08-03-2018 03:12 AM

‎08-03-2018 03:12 AM

V1910 series Multi Gateway

Hello Everyone, i have HP V1910-48G Switch with IPv4 routing capabilities and VLAN :

Native VLAN 1 :192.168.0.0

Voice VLAN 50 :192.168.50.0

My current routering setup in  HP V1910-48G Switch :

Destination IP Address:  0.0.0.0    Mask: 0.0.0.0       Next hop: 192.168.0.254

what i need is to configure the switch route looks this but it didnt work :

Destination IP Address:  192.168.0.0  Mask: 255.255.255.0      Next hop: 192.168.0.254

Destination IP Address:  192.168.50.0  Mask: 255.255.255.0    Next hop: 192.168.0.253

is there solution?

thanks.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.