Applying MSA Patch (IN210P001) , OK ?

[mrkm]

Hello!

Patch software version IN210P001 for HPE MSA 1060/2060/2062 was released on May 21, 2024.

Has anyone applied the patch?

Have you had any problems after applying it?

I'm planning on applying the patch next week.

Thank you in advance.

[ArunKKR · Accepted solution]

Hi,

We have installed IN210P001 firmware on few arrays and no issues were reported so far.

There are few fixes in this version as you could see from the firmware release notes.

[JonPaul]

@mrkm 
Just curious as to how you found out about the firmware release?
  - Using the Update Server feature of the MSA, the array notified you
  - Using the MSA HealthCheck site   https://www.hpe.com/storage/MSAHealthCheck
  - Using the MSA Firmware site    https://www.hpe.com/storage/MSAFirmware
  - Using the standard hpe support site:   https://www.hpe.com/support
  - Other HPE resource
  - Other non-HPE resource

[mrkm]

Thanks for the reply.

I will try to apply the patch.
If something occurs, I will reply.

Thanks ! 

[mrkm]

Thanks for the reply.

We are registered with HPE for the products we own.
When a patch is released they will notify us via email.

https://support.hpe.com/connect

Thanks !

[ArunKKR]

Hi,

I would suggest logging an HPE support case if you come across any issues after installing the latest firmware. This will help us in providing a solution after reviewing the logs.

[mrkm]

Hello.

We have installed the firmware "IN210P001" on the MSA1060 FC Model.

So far, we have not encountered any problems.

If any issues , we will contact HPE support (and post this forum) .

Thank you !

[Sunitha_Mod]

Hello @mrkm,

That's Perfect! 

We are glad to know the problem has been resolved and we appreciate you for keeping us posted. 

Please do let us know if you need any further assistance. 

[FP002236]

I installed it on an MSA 2060 FC and found a problem when setting up a static IP on the controller B. The controller A took the static IP without issues. However, when I set a static IP on controller B it does not save it after saving the settings and attempting to reach the controller using the secondary static IP. The controller B is keeping the default 192.168 default address. This is an issue for redundancy purposes since both controllers are on a different network. If controller A goes down, controller B won't be reachable if the IP is in a different network. I was able to fix it once I upgraded to the firmware version IN210P002.