Atachar msa 2060 iscsi

[hannarabr]

Boa tarde!
tenho um msa 2060 iscsi que estava atachado num servidor xcp, porém após uma queda de luz perdeu o apontamento e agora qd tento atachar ele me pede pra formatar
Haveria alguma forma de atachar sem a formatação?

Google Translated:

Attach msa 2060 iscsi
Good afternoon!
I have an msa 2060 iscsi that was attached to an xcp server, but after a power outage it lost its connection and now when I try to attach it it asks me to format it
Would there be any way to attach it without formatting?

[support_s]

System recommended content:

1. HPE MSA 1060/2060/2062 Storage Troubleshooting Guide

2. HPE MSA 1060/2060/2062 CLI Reference Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[ArunKKR]

Hi,

As MSA is a block level device there are no options to fix file system level issues. You could try a graceful power cycle and check whether it helps. 1. Shut down both the storage controllers  through SMU or SSH CLI 2. Remove power to MSA controller enclosure and attached disk enclosures if any 3. Provide power to disk enclosures 4. Allow 3-5 minutes for all drives to spin up and then provide power to controller enclosure.  5. If issue persists you could try to shut down the controller which owns the Pool and check whether it helps. This will change pool ownership to second controller and allow use of its ports and paths. You might need to work with operating system support team to check for any options to repair the volume at file system level, if the above suggestions does not help.

[ArunKKR]

Hi , We would like to know if the information shared addressed your issue. Request you to please respond with a Yes/No You may also click on "Accept as a Solution" button if the issue is resolved.