Delete Virtual Disk Group (Stauts QTOF)

[YannD]

Helli @Cali 

I have found this topic https://community.hpe.com/t5/msa-storage/msa-2040-delete-virtual-disk-group-stauts-qtof/td-p/7224406 , and i have a same error on a MSA 1060, can you help me with this ? 

Best regards,

Yann D.

[support_s]

System recommended content:

1. HP MSA 2040 SMU Reference Guide

2. HPE MSA 1040/2040 SMU Reference Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Azr_geek · Accepted solution]

Hello @YannD,

That QTOF disk‑group object is being protected by the controller’s internal quarantine and there’s no safe public Delete button for it in the SMU  HPE support normally removes those objects with internal commands. You can still recover a usable state, but it requires either a maintenance window (drive removal/rebuild) or accepting the risk of destructive actions. Below are concrete, low‑risk >> higher‑risk options and exact steps you can try.

Anything that forces the removal of the controller's internal objects can be destructive and irreversible. Proceed only if you understand the risk and have backups of any important data (including Volume A).

If you can get HPE support (or an HPE partner) that’s the safest route. They have validated internal commands that remove quarantined objects without leaving the controllers in an inconsistent state.

Regards,
Azr_geek

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".