Disk replacement MSA 2040

[Akshay41]

Disk replacement process on MSA 2040, Do we have any official document where the steps has been mentioned clearly ?

[support_s]

System recommended content:

1. HPE MSA 2040 SAN Storage - Configuration

2. HPE MSA 2040 SAN Storage - Cabling

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[venkat_y · Accepted solution]

Hello@ Akshay41 ,

Please refer to the document below for clear information regarding replacing the disks in the MSA 2040 Storage.
https://support.hpe.com/hpesc/public/docDisplay?docId=c04220794 
(Pages no 38 and 93)

Steps: To change the dedicated spares of a disk group,

1. In the Pools topic, select the linear pool for the disk group that you are modifying in the pools table. Then, select the disk group in the Related      Disk Groups table.
2. Select Action > Change Disk Group Spares. The Change Disk Group Spares panel appears on the screen.
3. To add dedicated spares, select available disks. SPARE appears on each selected disk.
4. To remove dedicated spares, select current spares. SPARE no longer appears on the selected disk.
5. Click Change.
6. To close the confirmation panel, click OK

Hope this helps!

Regards,
Venkat